MTL3041 REPEATER POWER SUPPLY, 4/20mA for 2-wire transmitters.

MTL3041 REPEATER POWER SUPPLY, 4/20mA for 2-wire transmitters.

Model: MTL3041

Categories: MTL3000 Series

Please contact us for more information.

PRODUCT DESCRIPTION

MTL3041 REPEATER POWER SUPPLY, 4/20mA for 2-wire transmitters.

The MTL3041 provides a fully-floating dc supply for energising a 2- Load wire, 4/20mA transmitter in a hazardous area, and repeats the current accurately in another floating circuit to drive a load in the safe area. The 17.5V output (at 20mA) is more than sufficient for all normal transmitter loops, and the fact that it floats allows the field cables to be earthed, either intentionally or in error. The isolation of the safe-area circuit from the 24V dc supply allows systems to be wired without difficulty so as to eliminate measurement errors due to voltage drops in shared cables, and solves the problem of feeding control computers connected independently to earth as is sometimes demanded by their makers. The transformer-coupled circuit of the

MTL3041 chops the 4/20mA current directly, eliminating the need for any ‘high-stability’ resistors and ensuring extremely high long-term as well as short-term stability. For applications involving ‘smart’transmitters, use the MTL3046B.



MTL3000 series

Product CodeDescription

MTL3011   Switch/proximity detector relay - volt-free contacts

MTL3012   Switch/proximity detector relay - solid state 

MTL3013   Switch/proximity detector relay - 2-channel 

MTL3014   Switch/proximity detector relay - dual outputs

MTL3021_22  Solenoid/alarm driver ~ IIC loop powered

MTL3041   Repeater power supply - 4/20mA for 2-wire transmitters 

MTL3042   DC isolator - 4/20mA loop powered for I/P converters

MTL3043   DC isolator - 1/40mA for fire and smoke detctors

MTL3045   Isolating driver - 4/20mA for I/P converters 

MTL3046B  Repeater power supply - for ‘smart’ transmitters

MTL3052   Digital isolator - for signals up to 10kHz

MTL3054   Communications isolator/ repeater

MTL3058_59  Serial data interface ~ RS232 general purpose

MTL3071   Temperature converter ~ THC or emf input

MTL3072   Temperature converter ~ 3-wire RTD input

MTL3073   Temperature converter ~ THC or RTD input

MTL3081   Millivolt isolator - for low-level inputs

MTL3099   Dummy isolator - for terminating and isolating unused cores 

MTL3992   High stability power supply


Related Products