MTL Redundant Fieldbus Power Supplies MTL 9188 is 8 segment N+1 redundant fieldbus power supply For Yokogawa CENTUM CS3000 control system.
The NEW 9180 range should be selected for all new applications. Its unique N+1 redundancy approach provides flexibility to the system designer meeting the initial demands of the project with 2 power supply modules/segment, whilst having the ability to add a third power supply later to meet expansion requirements. The advantage to the operator is typically a 25% saving in initial capital cost compared to a conventional, 1+1 redundant architecture. High system availability is achieved with the use of passive components for power conditioning, galvanic isolation and power regulation delivering redundant fieldbus power at up to 28V, 500mA/segment. The product range also includes power supply modules that can be used to provide power for segments with Ex ic spurs, to be used in conjunction with MTL F300 range of Megablock device couplers and F30 Ex ic adaptor.
The 9188 fieldbus power system is designed to provide redundant power for eight, or four, Foundation™ fieldbus H1 segments on the Yokogawa CENTUM CS3000. It is optimised for use in general purpose and hazardous area High Energy Trunk architectures which, with the appropriate FieldPlus wiring components, supports fieldbus devices using all hazardous area protection techniques.
The power supply has been designed to optimise cabinet layouts, maximising the number of fieldbus segments powered per cabinet while providing space for installing and maintaining cableconnections and minimising the operating temperature.
SURGE PROTECTION
The design of the 9188 has made the installation of effective surge protection on fieldbus trunk a simple matter, through the
use of individual FS32 modules. A grounding bar is available, that is attached to the power supply carrier to provide both
mechanical support for the FS32 modules as well as a way of connecting them to a local low impedance ground point to
dissipate any induced surge currents. See the Accessories section below. A full technical datasheet for the FS32 is available
from the MTL website.
ORDERING INFORMATION
PART NO DESCRIPTION
9188-CA-Px Carrier, unpopulated
9191-FP 4-segment power module: 28V, 250mA
9192-FP 4-segment power module: 19V, 250mA, for Ex ic spur applications
9197-BLK Alarm blanking module (used in any empty power module position to defeat the carrier alarm)
9188-21-Px 4 segment system with 9188-CA-Px carrier, 2 x 9191-FP and 4 x 9197-BLK
9188-41-Px 4 segment system with 9188-CA-Px carrier, 3 x 9191-FP and 3 x 9197-BLK
9188-61-Px 8 segment system with 9188-CA-Px carrier, 4 x 9191-FP and 2 x 9197-BLK
9188-91-Px 8 segment system with 9188-CA-Px carrier and 6 x 9191-FP
9188-22-Px 4 segment system with 9188-CA-Px carrier, 2 x 9192-FP and 4 x 9197-BLK
9188-42-Px 4 segment system with 9188-CA-Px carrier, 3 x 9192-FP and 3 x 9197-BLK
9188-62-Px 8 segment system with 9188-CA-Px carrier, 4 x 9192-FP and 2 x 9197-BLK
9188-92-Px 8 segment system with 9188-CA-Px carrier and 6 x 9192-FP
MTL Redundant Fieldbus Power Supplies
1. NEW 9180 Range - 8 segment with N+1 redundancy
9181 8 segment N+1 redundant fieldbus power supply For Invensys Foxboro I/A control system
9188 8 segment N+1 redundant fieldbus power supply For Yokogawa CENTUM CS3000 control system
9189 8 segment N+1 redundant fieldbus power supply, Universal
2. F800 Range - first generation 8 segment with 1+1 redundancy
F810A 8-segment redundant fieldbus power system with baseplate for Foxboro EVO™ Control System
F811 8-segment redundant fieldbus power system for Foxboro I/A Series Control System
F860 8-segment redundant fieldbus power IOTA specifically for use with Honeywell Experion “Series C”
F880 8-segment redundant fieldbus power for Yokogawa CENTUM 3000 R3 Control System - vertical DIN rail
F890 8-segment redundant fieldbus power supply for vertical DIN-rail mounting
F892 8-segment redundant fieldbus power supply for horizontal DIN-rail mounting
3. Classic F800 and FPS Range
F810 8-segment redundant fieldbus power system with baseplate for Foxboro I/A Series Control System
FPS-I Redundant fieldbus power supply/conditioner - single segment with 1+1 redundancy